Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12Styles B, C & E Assembly Instructions Tools Needed #2 Square Head OR Phillips Head Bit Electric Drill Level OR Long Straight Edge Each fence section kit will include the following: Styles B & C Standard Picket: 15 pickets per section, 3 rails, 2 with punched picket holes, 45 self drilling screws. Style E Standard Picket: 15 pickets per section, 2 rails, 1 with punched picket holes, 30 self drilling screws. Styles B & C Double Picket: 31 pickets per section, 3 rails, 2 with punched picket holes, 93 self drilling screws. Style E Double Picket: 31 pickets per section, 2 rails, 1 with punched picket holes, 62 self drilling screws. Styles B & C Puppy Picket (Style E is not offered in a Puppy Picket design): 15 Full Length pickets per section, 4 rails, 3 with punched picket holes, 16 Puppy Pickets per section, 92 self drilling screws. Assembly Step 1: Place 2 posts on a level flat surface with the routed rail holes facing each other. Note: If you did not purchase posts, please refer to the rail spacing below on the specification drawings. Step 2: Insert the lower rail(s) into the post holes. The lower rails are the rails with the punched picket holes. There will be 2 lower rails for Styles B & C and 1 lower rail for Style E.